Your heat pump is an important part of your home because it delivers year-round comfort. But, like any home comfort system, it’s bound to encounter some issues once in a while.

Let’s review these problems and how much they might cost to fix, so you’ll have some idea before you call an HVAC technician. Some of the most typical heat pump repair problems include:

  • Heat pump won’t turn on
  • Heat pump won’t turn off
  • Heat pump won’t defrost
  • Heat pump won’t cool
  • Heat pump won’t turn on after changing thermostat
  • Heat pump won’t heat

1. Heat Pump Won’t Turn On

There are lots of reasons why your heat pump won’t turn on, so we recommend checking all of them. Sometimes they are as easy as correcting a thermostat setting or replacing your air filter.

Here’s what to check:

  • Is your thermostat on the correct setting? If you want cooling, make sure it’s set to “cool,” “auto” and that your setting is lower than the current temperature. If you want heat, it should be set to “heat,” “auto” and your setting should be higher than the current temperature. If you use a programmable thermostat, replace the batteries if the screen appears jumbled or blank.
  • Has the circuit breaker been tripped? Your heat pump won’t be able to operate if it lacks power. Reset the matching breaker if it’s facing the outside of the electrical panel.
  • Is the air filter blocked? A dirty air filter is problematic for your heat pump. If you can’t see light through it, it’s time to get a new one.

If these steps don’t fix the problem, you’ll need to call a heating and cooling company like Forster Heating.

Estimated Repair Cost

This problem can be complex, so how much it costs to fix it will depend on what’s wrong.

2. Heat Pump Stays On Constantly

If it’s extremely hot or cold outside, your heat pump may need to run longer than normal to achieve your desired temperature.

If the weather is normal, check that your thermostat is set correctly and operating normally. If the fan setting is at “on,” the blower motor on your air handler will run 24/7. So, it’ll appear as though your heat pump is running all the time. Constantly running the blower can keep humidity levels in check, but it’ll also drive up your electrical bills.

If your thermostat is set properly, there are a few other issues that could be causing your heat pump to run all the time. They include:

  • A new thermostat that isn’t compatible with your heat pump.
  • A malfunctioning compressor contactor, which regulates the flow of electricity.
  • Leaky ductwork.

Estimated Repair Cost

This can be related to a few issues, so your heat pump repair cost will depend on the problem and how difficult it is.

3. Heat Pump Can’t Remove Ice Buildup

Occasionally during cold weather, your heat pump will briefly go into cooling mode. This will melt light frost and ice that naturally builds up on the coils. A heat pump that becomes totally frozen may struggle to heat your home or shut down altogether.

Here are a few reasons why this might be taking place:

  • Your heat pump doesn’t have sufficient airflow because it’s obstructed by snow, bushes or yard waste.
  • Your gutters are leaking water on top of your heat pump, creating an icy buildup.
  • A part is not working, which may involve the reversing valve, relays, controls or sensors.
  • The outdoor fan motor is damaged, dying or dead.
  • Your heat pump has a refrigerant leak. This is possible if you’re hearing bubbling or hissing sounds. Or if you find a sweet, formaldehyde-like odor near the outdoor unit.

Estimated Repair Cost

Like we discussed before, there are a few reasons why your heat pump won’t defrost. But here are a number estimated costs for some of these issues. Keep in mind your cost may vary based on your heat pump brand, model and the severity of the issue.

  • Replace reversing valve: $200–$600
  • Replace outdoor fan motor: $250–$650
  • Repair refrigerant leak: Depends on the kind of refrigerant your heat pump uses. R-22 Freon is more expensive since it’s no longer being manufactured.

4. Heat Pump Isn’t Cooling

Just like a heat pump that won’t turn on, a heat pump that won’t cool can be connected to many troubles. We recommend checking for:

  • Right thermostat settings
  • Tripped circuit breakers
  • A clogged air filter
  • Ice on your heat pump

If there’s nothing wrong with your thermostat, circuit breakers or air filter, you’ll need help from an HVAC technician to diagnose a problem with your ductwork or an iced-over heat pump. Like we reviewed earlier, a heat pump that won’t defrost might have a problem with its reversing valve, outdoor fan motor or a refrigerant leak.

Estimated Repair Costs

These repair costs are estimates. Your total cost may vary based on your heat pump brand, model and the severity of the problem.

  • Replace reversing valve: $200–$600
  • Replace outdoor fan motor: $250–$650
  • Repair refrigerant leak: Depends on the type of refrigerant your heat pump uses. R-22 Freon is pricier since it’s no longer being produced.
  • Seal leaky ductwork: Depends on house size.

5. Heat Pump Isn’t Starting After Upgrading the Thermostat

If your heat pump won’t turn on after altering the thermostat, the problem is probably linked to your new thermostat. While you can install just about any thermostat with a furnace, the same isn’t accurate for heat pumps, especially if you need backup or emergency heating.

You can check your new thermostat by changing the fan mode to “on.” If you don’t hear the blower motor start in your air handler, there’s probably an issue with the thermostat.

A couple other common thermostat problems include:

  • Wiring was done wrong.
  • Thermostat isn’t communicating with heat pump.
  • Thermostat is in emergency heat mode, which involves a reset.

It’s recommended to have a heating and cooling professional recommend a thermostat and expertly install it. That way, you’ll stay away from any compatibility or wiring problems.

Estimated Repair Costs

The cost of professional thermostat installation depends greatly on what kind of thermostat you want. While programmable thermostats are less expensive, they are missing the sophisticated features and convenience of a smart thermostat.

6. Heat Pump Won’t Heat

A heat pump that won’t heat is linked to similar problems with a heat pump that won’t cool. We recommend checking for:

  • Appropriate thermostat settings
  • Tripped circuit breakers
  • A clogged air filter
  • Ice on your heat pump

An icy heat pump or leaky ductwork will require the help of an HVAC technician. Ductwork is tricky to reach since it’s located behind walls and several issues can cause your heat pump to freeze up.

Estimated Repair Costs

These repair costs are estimates. Your total cost may vary based on your heat pump brand, model and the level of the issue.

  • Replace reversing valve: $200–$600
  • Replace outdoor fan motor: $250–$650
  • Repair refrigerant leak: Depends on the kind of refrigerant your heat pump uses. R-22 Freon is higher priced since it’s no longer being produced.
  • Seal leaky ductwork: Depends on house size.

Fix Those Heat Pump Problems Quickly and Affordably with Help from Local Experts

Dealing with a malfunctioning heat pump can be annoying, but not when you call Forster Heating. Our pros have been delivering the quality, affordable heat pump repair Auburn homeowners have depended on since 1979. Get in touch with us at 530-885-8081 to get your free estimate now.

Average repair costs are sourced from Fixr, which compiles estimates based on nationwide averages.